How cable length and thickness affect 12V circuits
Why the far end of a 12V wire gets less than 12 volts
These pages explain voltage drop on low-voltage 12V DC wiring, one idea at a time. You'll see how cable length, thickness and current change the volts that reach a light, a fridge or a charger. Each page uses a short example and cites its sources.
It's written for beginners wiring a caravan, shed or small cabin, mostly in Australia.
All the cable notes
What Is Voltage Drop on a 12V Circuit?Why a 12V light or fridge can get less than 12 volts at the far end of a wire, and what that loss means in a caravan, shed or cabin.
How to Calculate Voltage Drop Step by StepA simple sum for working out voltage drop on a 12V cable from the current, the cable length and the cable size, with one worked example.
How Much Voltage Drop Is Acceptable?What limit one wiring maker advises for 12V circuits, why codes differ by country, and why local rules and a device's own manual both need checking.
Reading a 12V Cable Size ChartHow to use a chart of amps, metres and square millimetres to pick a cable size, shown with a real maker's table and what the chart leaves out.
mm2, AWG and B&S: Cable Size Units ExplainedWhat the cable size labels mm2, AWG and B&S mean, how they relate, and a short conversion table from a maker's chart for common sizes.
Why Cable Length Means the Round TripWhy voltage drop sums use the positive and negative wire together, shown with a worked example from a maker's wiring guide.
Voltage Drop Between Solar Panels and the ControllerHow cable size and length affect the run from solar panels to a charge controller, and why a higher-voltage array with MPPT means less current.